hr: Golfing

All about Golf

How to Choose the Right Golf Ball

Posted by Rosanne Lorraine Lim on February 17th, 2009

To an untrained eye, all golf balls look the same. But for those who golf, they know that their golf ball can mean the difference between first place and second place. Certain characteristics are the standard for all golf balls. For example, all golf balls cannot be larger than 1.68 inches in diameter and they cannot be heavier than 1.62 ounces. However, there are slight differences that can make or break a game.

There are two basic types of golf ball including balata balls and the surlyn.

Balata ball – this type of golf ball is composed of three materials including the liquid core, the rubber would wrapping around the core, and the balata cover. Balata is a substance that feels quite soft and some believe that it allows a golfer to “shape” his shot. It is more expensive than surlyn balls are typically has a shorter lifespan.

Surlyn – the surlyn ball is composed of two materials including a solid core and the surlyn cover. The surlyn is a man-made material created to minimize nicks and cuts to the golf ball. It is harder compared to its counterpart.

If you’re looking for a golf ball that will give you the best performance, try TITLEIST 2009 PRO V1XGOLF BALLS1 DOZEN PACK.

Sphere: Related Content

Posted in Golf Equipment | No Comments »

Golf Chipping

Posted by Rosanne Lorraine Lim on February 12th, 2009

Golf chipping with Callaway Men’s FT-5 Tour Driver LH Used is something you should do. Chipping is very much similar to putting but with important differences. For example, it requires loft and it is typically used to get past an obstacle. Golf chipping is usually done in a sand trap, a rough, or water. The main purpose of the chip is to give the ball momentum.

If you’re not chipping to get over an obstacle then look into putting it instead. During the chip, you may chop to check, stop, walk, back up, or even to run the ball. In chipping, think of tossing coins to a certain spot. The image should be there during chipping process. After the spot has been hit, ask yourself how long the ball needs to roll in order to get to the cup.

The ball position is critical in chopping because the ball should be struck solidly. In order to do this, the ball must be located just right next to the right foot (or left if you’re left-handed). Try to line to ball to your little toe to give you a solid contact.

Sphere: Related Content

Posted in Player Guides | No Comments »

Carry Golf Clubs with Caddy Carry-Comfort

Posted by Rosanne Lorraine Lim on February 7th, 2009

Known for its ability to give a golfer distance and accuracy, the fairway metal golf club is a must-have for every aspiring professional golfer. However, you shouldn’t use the driver if you hadn’t practiced with it before playing. This tip can save you a few strokes at the start of the round.

For Distance

The fairway metals are particularly recommended when the distance to the green exceeds the capability of other golf clubs. They are usually used when the flag is placed at the back because it stopping them requires a bit of an expertise unless you are using 7 or 11-metal. It is important to have a sweeping motion in this type of shot.

Experts advice that deep divot should be avoided. The main objective should be to take a good contact with the ball. Never try to over-swing when using fairway metal because it already gives accuracy and distance.

Monitor Your Play

Document your play to find out how you swing your golf club. It will enable you to discover your weaknesses. In addition, it will help you know whether you should use a regular club or a special golfing iron. You can use Caddy Carry-Comfort to carry your golf clubs comfortably.

Sphere: Related Content

Posted in Golf Equipment | No Comments »

The Right Golf Alignment

Posted by Rosanne Lorraine Lim on February 4th, 2009

To hit the golf ball perfectly, it is important to know golf fundamentals such as balance, grip, and swinging. If you are sure that you can hit the ball to the direction you want it to take, you will have the confidence to take a shot. However, until then, most golfers stick with the safe shot. Remember that the swing path will determine if you can get the ball to the target. This is where golf alignment comes in.

Selecting an Alignment Point

In order to align, you should stand behind the ball in such a way that it is between you and the target. From three to five feet, you can see whether or not the golf ball is in proper position. After you picked a target, look from the target to the golf ball and find a spot linear to the ball. This is the intermediate alignment point, you need to perfect this.

Stand Parallel to the Target

Before anything else, you should remember to grip the TaylorMade Men’s Rescue Dual TP Hybrid LH Used properly. In order to do this, right-handed golfers need to stand with their left food forward and vice versa for left-handed player. Align the golf club with the other hand so that the lines are parallel to foot. The grip you should take should now be aligned to your feet. The swing path must be down this line.

Sphere: Related Content

Posted in Player Guides | No Comments »

How to Choose a Driver

Posted by Rosanne Lorraine Lim on January 30th, 2009

In choosing a golfing driver, one of the first things you need to consider is the size. Mot models are within the USGA’s legal volume size of 460cc. Often, it is recommended for you to get a Callaway Women’s Biggest Big Bertha Driver RH Used drivers because of its “sweet” spots. That is, you have a better shot at getting improved consistency and accuracy once you hit the golf ball. However, experienced players actually prefer those with small driver heads because it enables them to have more control.

Whatever the case, golf driver designers are continually coming up with ways to improve internal and external weighting. Their main goal is to help every golfer have the perfect swing that is comfortable and easy to execute. Also, the driver should be controlled by the golfer if he wants to it go higher, lower, or longer. Weight screws, unique head shape, or lightweight carbon crowns are just some of the options available in the market. You should find out which provides you with the best performance and go for it.

Sphere: Related Content

Posted in Golf Equipment | No Comments »

Swing Hard to Get Better Drives

Posted by Rosanne Lorraine Lim on January 27th, 2009

When you watch the longest hitters in golfing tournaments, you will inevitably see golfing superstars such as Bubba Watson, J.D. Holmes, and Tiger Woods hit their drives with all their might. Have you ever wondered why they do this? Today’s big drivers tend to have spots that are larger than the ball.
Even if you don’t have the perfect aim, you can still hit the ball solid. In order to hit the driver as far as you can, swing it faster and longer. Release the golf club on impact and worry about other considerations afterwards.

Experts advise that you should “tee” it high. Most drivers are 45 inches long. Because of this, the optimum position for the ball is forward. Tee the golf high because it will help you catch it during upswing. The trajectory of the Nike Juice 312 - Golf Ball is also important. It is a matter of finding the right driver and hitting with enough force to launch the ball higher. This creates longer drives while retaining accuracy.

Another tip to get better drives to find a good lie on tee. A lot of tee boxes aren’t perfect. Typically, it will slope in one direction. Tee up to a position where your feet feel level and even.

Sphere: Related Content

Posted in Player Guides | No Comments »

Body Rotation

Posted by Rosanne Lorraine Lim on January 23rd, 2009

Golf Swing

One of the key elements to golfing is the rotary swing. But in order to accomplish this, it is first important to learn about the proper body rotation. As its name implies, the rotary swing is not simply a vertical swing. It is about rotating the body so the aim to the golf ball will be precise. How can you rotate your body though? There are two things to keep in mind.

First, you need to ensure that your shoulders are rotating perpendicular to the center of your back. Instead of tilting, try to turn your shoulders at a fixed angle. The easiest method to do this is to imagine standing up straight and then turning your shoulders back and through to the chest.

The second point to remember is ABT, the acronym for “always be turning”. Since the technique is rotational, success depends on how you control your body rotation. Rotate your body during golf swing because otherwise, the arms will power. This will result to inconsistency and a poor aim.

Sphere: Related Content

Posted in Player Guides | No Comments »

Discipline and Luck

Posted by Rosanne Lorraine Lim on January 13th, 2009

Golfing Luck

You might be the “champion” in your group when playing for recreation during Sundays but playing for a golf tournament is another thing altogether. First, remember that there’s no pressure in playing with friends for fun. Generally, you have the same handicap, have the same scores, and enjoy the surroundings. Missing a put means paying a little “skin” money to your pals. And you’ll see the guys again next week for another round.

Tournaments are different because instead of having a familiar group trying to outscore you, there are 150+ players trying to do the same thing. Winning a tournament is about having the necessary skill and having luck on your side. You might have had a great shot. However, that will amount to nothing if suddenly hits a sprinkler.

Nevertheless, preparation is of utmost importance. The necessity for practice cannot be stressed enough. It gives you an edge over others who lack practice and skill. Be sure that you are using the right techniques in your practice though. It is essential to know the exact yardage on the greens. If you have not chartered the greens, do so. Divide it into quadrants and then chart the grain, breaks, and slope.

Sphere: Related Content

Posted in Player Guides | No Comments »

Three Techniques to Hit Good “Long” Clubs

Posted by Rosanne Lorraine Lim on January 10th, 2009

Golfing

For a lot of women and even men, the long clubs are the most challenging to hit. This is because many lack the confidence with their fairway clubs and drivers. But by utilizing the following techniques, it does not need to be so difficult:

•    Distinguish between hitting wood and iron – when you hit iron, remember to keep a steep angle of descent to get the golf ball on air. If you use the driver, the ball is teed up; your goal is to sweep it off tee and not to hit it down. Keep in mind that the position of the ball is important.  Place the ball opposite your foot to have a sweeping shot.

•    Focus on clubhead speed – it is essential to have at least 80 miles/hour of clubhead speed in order to hit a 15-degree club. To help you speed up, try to lighten your grip pressure because a tight grip minimizes speed. Feel the weight of the clubhead and if it feels light, loosen your grip.

•    Shift the weight during downswing – this technique will also help in clubhead speed. You’ll be able to hit the ball at the right angle as well. Be careful of reverse pivoting, because it will cause your weight to hinder you upon impact.

Sphere: Related Content

Posted in Player Guides | No Comments »

Tips to Have a Good Grip

Posted by Rosanne Lorraine Lim on January 6th, 2009

Golf Grip for Beginners

There are many critical elements in golfing and the golf grip is one of them. It is impossible to play golf without some sort of grip technique. In fact, even a beginner will adjust his grip according to what feels comfortable to him. This adjustment can become a habit if it is used for the long term. For this reason, it is essential to have the correct golf grip when starting golf.

There are several basic types of grip including the interlocking, the overlapping, and the two-handed grip among others. Try the different types of golf grip and explore what works best for you. However, take note that whatever you decide, certain guidelines are generally helpful. These include:

Tip Number One

Remember that no matter your grip, certain elements must be present. First, the face of your club should be square upon impact. This enables you to know where the ball will go once it is hit. The square club face can make the strike solid.

Tip Number Two

Your body is symmetrical; use your body as a guide to make an accurate strike. Look at your thumb when you place your hands on the club. If the club is at your side, the club must on the right side of your grip.

Sphere: Related Content

Posted in Player Guides | No Comments »